Lesson 8 of 19 · Module 2: Time response analysis

Second-order response and time-domain specifications

Control System Engineering · EEE2510 · Sessions 15–18 · CO3

By the end of this lesson you can

  • Relate damping ratio to pole locations and response shape
  • Compute rise time, peak time, overshoot and settling time
  • Explain the effect of added poles and zeros

Notes

$$\frac{C(s)}{R(s)} = \frac{\omega_n^2}{s^2 + 2\zeta\omega_n s + \omega_n^2}, \qquad s_{1,2} = -\zeta\omega_n \pm j\omega_n\sqrt{1-\zeta^2}$$

Damped frequency $\omega_d = \omega_n\sqrt{1-\zeta^2}$. Undamped ($\zeta = 0$), underdamped ($0 < \zeta < 1$), critically damped ($\zeta = 1$), overdamped ($\zeta > 1$).

Time-domain specifications (underdamped, unit step)

SpecificationFormula
Rise time $t_r$ (0–100 %)$\dfrac{\pi - \theta}{\omega_d}$, with $\theta = \cos^{-1}\zeta$
Peak time $t_p$$\dfrac{\pi}{\omega_d}$
Peak overshoot $M_p$$e^{-\zeta\pi/\sqrt{1-\zeta^2}}\times 100\,\%$
Settling time $t_s$$\dfrac{4}{\zeta\omega_n}$ (2 %), $\dfrac{3}{\zeta\omega_n}$ (5 %)
Delay time $t_d$$\approx \dfrac{1 + 0.7\zeta}{\omega_n}$

Added poles and zeros

  • An extra left-half-plane pole slows the response and reduces overshoot. If it is more than five times farther from the axis than the dominant poles, it can be ignored.
  • An extra left-half-plane zero speeds the response and increases overshoot.

Lecture

🎬
Lecture video
Coming soon. The recorded lecture for this lesson will appear here.

Try it

Exercises

  1. $G = 25/(s(s + 6))$ with unity feedback. Find $\omega_n$, $\zeta$, $M_p$, $t_p$ and $t_s$ (2 %).
    Show solution
    $T = 25/(s^2 + 6s + 25)$: $\omega_n = 5$, $\zeta = 0.6$, $\omega_d = 4$. $M_p = e^{-0.6\pi/0.8} = 9.5\,\%$. $t_p = \pi/4 = 0.785$ s. $t_s = 4/3 = 1.33$ s.
  2. What damping ratio gives 16.3 % overshoot?
    Show solution
    $\zeta = 0.5$.
  3. Set $\zeta = 0.6$ and $\omega_n = 5$ rad/s in the simulation and compare with Exercise 1.
    Show solution
    The readout shows about 9.5 % overshoot and a settling time near 1.3 s. Overshoot depends only on $\zeta$; settling time also depends on $\omega_n$.